|
﹛ |
|
Years of development experiences Months of hard design
work
QLdsPIC3----PIC 16bit Microcontroller Development Board
Demo board for PIC Microcontroller with the highest cost
performance
|
|
|
The QLdsPIC3 development board is
an experimental development board designed by QLS Electronic by integrating its
main characteristic function module based on variety of 16-bit microcontroller
DEMO boards home and aboard, the main circuit of which origins from the standard
DEMO board and reference application circuit of MICROCHIP Co. The design of
board resource is completely open which can be flexibly extended, is a good
assistant for mass of engineers to deal with the 16-bit MICROCHIP
microcontroller software and hardware design. |
The QLdsPIC3 development board supports PIC24FJ96GA008 and other chips
compatible with pin, and the chip module can be changed.
The QLdsPIC3 development board supports dsPIC30F6014A and other chips
compatible with pin, and the chip module can be changed.
The QLdsPIC3 development board supports dsPIC33FJ128GP708 and other chips
compatible with pin, and the chip module can be changed. |
|
|
|
|
On-board resourcesㄩ
|
 |
RS-485 and
RS-422
communication module 6-pin terminal block and configuration jumper
(use
DuPont wire can be connected to the arbitrary I/O port) |
|
 |
Ethernet module每
by Microchip's ENC28J60, 10BASE-T stand alone Ethernet Controller.(use
DuPont wire can be connected to the arbitrary I/O port) |
|
 |
Si3000 Voiceband Codec with MIC In/Speaker Jacks
每 Jumper for selection of Si3000 Codec mode (Master/Slave) (use DuPont wire can be connected to the arbitrary
I/O port) |
|
|
|
|
|
|
MMC\SD card slot - For MMC\SD memory cards. Used for data acquisition.(use
DuPont wire can be connected to the arbitrary I/O port)(remark:
MMC\SD card is optional). |
|
 |
Power
module
Separate on-board +5V and +3.3V regulators for VDD and AVDD with
direct input from 9V, AC/DC wall adapter, 9V DC power source input jack for
development, LED power-on indicator |
|
 |
Real Time Clock by PCF8583.(use DuPont wire can be connected to the arbitrary
I/O port) (Battery is included) |
|
|
|
|
|
 |
RS-232 communication A(Include RTS/CTS)
for connection with a PC or any
other device with a DB9 connector.
(use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
RS-232 communication B for connection with a PC or any other device with
a DB9 connector.
(use
DuPont wire can be connected to the arbitrary I/O port) |
|
 |
Single CAN communication channel
by MCP2551
(use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
|
|
|
 |
3xPotentionmeters for simulating analog voltage input..(use
DuPont wire can be connected to the arbitrary I/O port) |
|
 |
8-buttons are provided每for easy
various key-press input experiments and jumper setup for pull-up or pull-down of
port hardware.(use DuPont wire can be connected to the arbitrary I/O port) |
|
 |
Digital thermometer DS1820 for measuring temperature from -55ºC to
125ºC.(use DuPont wire can be connected to the arbitrary I/O
port)(remarkㄩ chip DS18B20 is optional). |
|
|
|
|
|
 |
Program or Debug connector Port for 每 to directly connect
ICD2/MCD2/ICD3/
PICKIT2 for the board target chip program or debug |
|
 |
8 LEDs
are provided. 每 t(use DuPont wire can be connected to the arbitrary I/O port) |
|
 |
PS2 connector
makes direct connection between QLdsPIC3 and PC keyboard. |
|
|
|
|
|
 |
User Target chip socket |
|
 |
16*2-character LCD每internal 5*7
lattices, to display 16*2-character.(use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
128*64- Graphic LCD每128*64 lattices.(use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
 |
 |
Preprogrammed dsPIC30F6014A Plug-in Module, VDD =5V, Crystal for 10Mhz,
On each corner of the card there is one electrolytic capacitor for stable power
supply.. |
|
﹛ |
﹛ |
﹛ |
 |
Preprogrammed PIC24FJ96GA008 Plug-in Module, VDD =3.3V,Please set VDD
jump for 3.3V, Crystal for 10Mhz, On each corner of the card there is one
electrolytic capacitor for stable power supply.(remarkㄩPIC24FJ96GA008
Chip Module is optional, Price is $24.90). |
|
﹛ |
﹛ |
﹛ |
 |
Preprogrammed dsPIC33FJ128GP708 Plug-in Module, VDD =3.3V,Please set VDD
jump for 3.3V, Crystal for 10Mhz, On each corner of the card there is one
electrolytic capacitor for stable power supply.(remarkㄩdsPIC33FJ128GP708
Chip Module is optional, Price is $24.90). |
|
|
|
﹛ |
|
Characteristicsㄩ
|
-
Open modular designㄩ All modules can be on/off controlled by DIP
switch. Each module is designed to connect to I/O port of Microcontroller.
Connection of module with any port of Microcontroller is conveniently
achieved through dupont thread. Connection to preset port is available by
using DIP switch without dupont thread. All I/O ports are open externally
with output socket. Expansion is easily accomplished.
- On-board simulation
debugging and Programmer interfaceㄩ direct connection to
ICD2/ICD3/MCD2/PICKIT2
- The master controller is in independent design and
it＊s easy to change.
|
 |
Board Resource Introduction:
1) Power supply module, Jump
select VDD for 5V or 3.3V
2) Master controller chip module
3) ICSP Connect port,it can connect
icd2/icd3/mcd2/pickit2 for program or debug,
4) Master controller chip ICSP I/O Pin select.
5) Reset key-press
6) LED module
7) Key-press module
8) A/D converter input module
9) DS18B20 digital thermometer module
10) Real time clock module by PCF8583
(Battery is included)
11)
16*2-character LCD
12) 16*2 LCD backlight potentiometer
13) 128*64-
Graphic LCD
14) 128*64 LCD backlight potentiometert
15) SD/MMC card Read/Write Module
16) PS2 module
17) CAN bus module by mcp2551
18) RS232 module B
19) RS232 module A
20) RS-485 and RS-422 communication module by
MAX489E
21) Ethernet module by
ENC28J60
22) Si3000 Voiceband Codec with MIC
In/Speaker Jacks
23) All pins are taken out on IDC10 connectors to
make them available for further connections.
|
|
|
|
|
Sample with C30 Program sources code as below
(using dsPIC30F6014):
RS232 CommunicationRS485
CommunicationCan CommunicationPS2
Real
time clock
Si3000 Voiceband Codec
DS1820
MMC\SD card Read/Write
128x64 GLCD
1602 LCD
Key-press
A/D
converter
|
|
Related Downloads: |
|
|
|
|
Standard
configurationㄩ |
|
Product Serial No.ㄩ
Q23 Weight:0.9kg |
|
PriceㄩUS
$150.00 (not include shipping) |
The auction includes
QLdsPIC3 DEVELOPMENT Board (Include
one
dsPIC30F6014A chip module,one 16*2 LCD,one 128*64 LCD)
RJ45 LAN Cable
RJ12 to RJ12 ICSP cable
Dupont thread expansion connection 20x wire
DC wall adapter(input: AC110-240V 50/60Hz, output: DC9V 1000mA)
CD-ROM or USB Flash Disk(English
version
PDF User manual ,PCB Board Layout PDF,Schematic PDF , Sample code (C30) , MPLAB
IDE, Chip's Datasheet)
|
|
|
|
Optional parts:
- DS18B20 ( DS1820 ) Temperature Sensor(TO-92 package)
US$3.00 for each
- 12864-character LCD Module Yellow Backlight
Each additional
US$14.00
- 1602 LCD with Yellow backlight
(have include in package)
Each additional US$4.00
1.0GB SanDISK SD Card
US$10.00 for each
dsPIC30F6014A Chip Module Each additional
US$24.90
PIC24FJ96GA008 Chip Module
US$24.90 for each
dsPIC33FJ128GP708 Chip Module
US$24.90 for each
Worldwide
shipping by DHL/UPS/TNT/FedEx/EMS... Express $30.00 for Q23----
(about 3-7 days)
Worldwide shipping by DHL/UPS/TNT/FedEx/EMS... Express $40.00 for Q24----
(about 3-7 days)
Purchasing Instructions:
At the time of purchase, please indicate the following:
﹛
Contact telephone number for shipping purposes
You can go directly to our EBAY purchased online stores, and
its Web site is:
http://stores.ebay.com/QLS-Microchip-pic-mcu-mpu-tools/QLS-HiFi-Audio-Product-/_i.html?_fsub=251997219&_sid=156679919&_trksid=p4634.c0.m322
|
FAQ |
|
Hi, if we buy now, when you shipped to me ?
|
- When we received you payment, we will sent
the items to you within 1-2 work days !
|
|
you sent the items to me ,you have the tracking
number for me ? |
-
We will send you by DHL/UPS/FedEX/TNT/EMS..Express,
This is have provide Tracking number!
and it can takes
3-7 working days !
|
|
If the item in the swap in the transport stolen, and
you will be re-distributed to us? |
- If you buy the parts, within the prescribed
time did not receive goods, we will re-sent to
you.
﹛
- For example,
if you buy the parts on jaunary 1, you will
received the parts on Jaunary 15 before, becuase
it takes 3-7 working days, if you not received
the parts on Jaunary 15 before, please tell me
we, we will re-sent to you!
﹛
|
- We WON'T resend any bounce back order due to
incorrect shipping address
|
|
﹛ |
|
payment method |
- Accept paypal
Credit card through Paypal
- Accept Pay to bank of chian
- Accept wester union
I will ship to the shown address on you PAYPAL
Payment notice.
Please confirm your shipping address in the
PayPal Account
or Please tell me your
shipping address by Email,
Please tell me you phone number
Buyers need to absorb ALL re-shipments fee of
returned packages
|
|
Return Policy |
- 100% money back guarantee or exchange the
same class of the products.
Full refund will be issued upon receipt of the
Deffective Item.
Please be advised that shipping and handling
cost are not refundable.
Buyers must be returned the defective products
within 7 days from the date when product
received.
Refund or Replacement will be sent after we
received your returning item.
In all cases, buyers pay shipping at their own
cost to return products for exchange or refund.
|
|
Shipping Schedule |
- Normally, Your order will be shipped within
1-2 our business days after the payment is
cleared.
The shipping time may vary, depends on
receiver's location.
|
|
Item Declare |
- Your item will mark as Gift or Sample and a
low's value.
We are NOT responsible for any import tax,
customs fees or customs delay.
Buyer cannot request to cancel the auction or
request for refund under this situation. Please
check with your local tax authorities BEFORE
bidding.
However, most of our items can reach to buyers
without any taxes.
|
|
|
| |
|
|
|
