Introduction
Mini_QL2006 programmer is the high-speed programmer designed
specially for development and production programming of PIC single
chip microcomputer by QLS Electronic Technology Co., Ltd. The
product is featured with small volume, low power consumption, high
reliability as well as easy and convenient operation.
Mini_QL2006 is applicable for almost all PIC10/12/16/18 series Microcontroller's except 16C5X. It also supports memories in 24XX series and 93XX
series.
Features
Features of Mini_QL2006 Programmer:
1.High performance-price ratio, designed with the updated PIC
programming algorithm, higher speed than other similar products,
stable performance, support more devices. Support online upgrade of
programmer hardware, easy and convenient upgrade. communication
modes of USB port, convenient for application on lap-top
computer which doesn’t have serial port (convenient connection of
one USB cable with computer). Automatic programming function and
automatic programming process enable mass production for customer’s
great convenience (programming available on chip installation
without pressing any other key).
2.Overall
message indication, audio plus word will enable customer well
informed about operating status.
3.Through
built-in ICSP interface, support ICSP (in-circuit serial programming) directly
without any additional device. User may program after circuit board
is welded. For FLASH Microcontroller, online upgrade is available.
4.Equipped with 40pin DIP socket, available
for direct programming of 8pin-40pin DIP chip. Programming of other
surface mount device (SMD) is available based on universal adaptor.
5.Compatible
with operating systems (OS) including Windows98, Windows2000/NT and
Windows XP, Windows 2003, Windows Vista.
6.
Function of programming counting, can preset and count the
programming number.
7.Function of serial number
auto-increment, available to set auto-increment area as program area
or EEPROM data area, set auto-increment system, set auto-increment
start address/end address and auto-increment step, set to ignore
high byte in auto-increment to avoid effect to RETLW instruction in
auto-increment part of program
8.Program supports load of
*.HEX or *.BIN files, available to converse *.BIN files to *.HEX
format.
9.With programming data monitoring. Through
check summing, available to find immediately if programming data is
changed or not. Verification and formula are subject to definition
of Microchip.
10.Programmer
hardware auto-search when start of software, no need for software
setup before use, easier and more convenient operation.
11.High programming success
rate, enough programming depth. Programmable voltage, electrical
parameter of programming and programming algorithm satisfy the
technical specifications of manufacturers.
Hardware
There is no special
requirement for installation of this programmer.
Connect programmer to
PC through USB cable, then the
programmer works. (This programmer supports direct USB power supply, you may not connect external power.
However, if current through USB interface is very low – less than
200MA and insufficient to drive programmer, connection to external
power is required to enable the programmer to work regularly.)
Software
Find file
QL-PROGvXXen.EXE under root directory of CD, double click this file
to access installation interface of application software, and
operate according to prompts to finish the installation.Its shortcut
will appear on desktop automatically after installation.
After proper
installation, shortcut of this software will appear on desktop. We
can double click it to run the software. (Note: Run the software
after proper connection of hardware so as to identify the hardware
easily.)
Interface after start of software is shown below:
