| |
|
QL2006 USB & RS232 PIC Programmer
for Microchip MCU
|
|
Introduction
QL-2006 programmer is the high-speed programmer designed
specially for development and production programming of PIC single
chip microcomputer (SCM) by QLS Electronic Technology Co., Ltd. The
product is featured with small volume, low power consumption, high
reliability as well as easy and convenient operation.
QL-2006 is applicable for almost all PIC10/12/16/18 series SCMs except 16C5X. It also supports memories in 24XX series and 93XX
series.
Features
1.High performance-price ratio, designed with the updated PIC
programming algorithm, higher speed than other similar products,
stable performance, support more devices. Support online upgrade of
programmer hardware, easy and convenient upgrade. Two communication
modes of USB and serial port, convenient for application on lap-top
computer which doesn’t have serial port (convenient connection of
one USB cable with computer). Automatic programming function and
automatic programming process enable mass production for customer’s
great convenience (programming available on chip installation
without pressing any other key).
2.Overall
message indication, audio plus word will enable customer well
informed about operating status.
3.Through
built-in ICSP interface (completely compatible with ICD interface of
MICROCHIP), support ICSP (in-circuit serial programming) directly
without any additional device. User may program after circuit board
is welded. For FLASH SCM, online upgrade is available.
4.Equipped with 40pin DIP socket, available
for direct programming of 8pin-40pin DIP chip. Programming of other
surface mount device (SMD) is available based on universal adaptor.
5.Compatible
with operating systems (OS) including Windows98, Windows2000/NT and
Windows XP.
6.
Function of programming counting, can preset and count the
programming number.
7.Function of serial number
auto-increment, available to set auto-increment area as program area
or EEPROM data area, set auto-increment system, set auto-increment
start address/end address and auto-increment step, set to ignore
high byte in auto-increment to avoid effect to RETLW instruction in
auto-increment part of program
8.Program supports load of
*.HEX or *.BIN files, available to converse *.BIN files to *.HEX
format.
9.With programming data monitoring. Through
check summing, available to find immediately if programming data is
changed or not. Verification and formula are subject to definition
of Microchip.
10.Programmer
hardware auto-search when start of software, no need for software
setup before use, easier and more convenient operation.
11.High programming success
rate, enough programming depth. Programmable voltage, electrical
parameter of programming and programming algorithm satisfy the
technical specifications of manufacturers.
Hardware
There is no special
requirement for installation of this programmer.
Connect programmer to
PC through serial port cable or USB cable and power up, then the
programmer works. (This programmer supports direct USB power supply.
If USB cable is connected, you may not connect external power.
However, if current through USB interface is very low – less than
200MA and insufficient to drive programmer, connection to external
power is required to enable the programmer to work regularly.)
Software
Find file
QL-PROGvXXen.EXE under root directory of CD, double click this file
to access installation interface of application software, and
operate according to prompts to finish the installation.Its shortcut
will appear on desktop automatically after installation.
After proper
installation, shortcut of this software will appear on desktop. We
can double click it to run the software. (Note: Run the software
after proper connection of hardware so as to identify the hardware
easily.)
Interface after start of software is shown below: |
|
 |
|
Support device:
|
10
series: |
|
PIC10F200
|
PIC10F202
|
PIC10F204
|
PIC10F206
|
PIC10F220
|
PIC10F222
|
|
12C series:
|
|
PIC12C508
|
PIC12C508A
|
PIC12C509
|
PIC12C509A
|
PIC12C671
|
PIC12C672
|
|
PIC12CE518
|
PIC12CE519
|
PIC12CE673
|
PIC12CE674
|
|
|
|
12F
series: |
|
PIC12F508
|
PIC12F509
|
PIC12F629
|
PIC12F635
|
PIC12F675
|
PIC12F683
|
|
PIC12F615 |
PIC12HV615 |
PIC12F510 |
|
|
|
|
MCV
series: |
|
MCV08A |
MCV14A |
MCV18A |
MCV28A |
|
|
|
HA
series: |
|
HA2089 |
HA2099 |
HA3089 |
HA3099 |
|
|
|
16C
series: |
|
PIC16C505
|
PIC16C554
|
PIC16C558
|
PIC16C61 |
PIC16C62 |
PIC16C62A |
|
PIC16C62B |
PIC16C63
|
PIC16C63A
|
PIC16C64 |
PIC16C64A
|
PIC16C65 |
|
PIC16C65A |
PIC16C65B
|
PIC16C66
|
PIC16C66A
|
PIC16C67 |
PIC16C620
|
|
PIC16C620A
|
PIC16C621
|
PIC16C621A
|
PIC16C622
|
PIC16C622A
|
PIC16C71 |
|
PIC16C71A
|
PIC16C72
|
PIC16C72A
|
PIC16C73 |
PIC16C73A
|
PIC16C73B
|
|
PIC16C74 |
PIC16C74A
|
PIC16C74B
|
PIC16C76 |
PIC16C77 |
PIC16C710
|
|
PIC16C711
|
PIC16C712
|
PIC16C716
|
PIC16C745
|
PIC16C765
|
PIC16C773
|
|
PIC16C774
|
PIC16C83 |
PIC16C84 |
|
|
|
|
16F
series: |
|
PIC16F505
|
PIC16F506
|
PIC16F54
|
PIC16F57*
|
PIC16F59*
|
PIC16F627
|
|
PIC16F616
|
PIC16HV616
|
PIC16LF627A
|
PIC16F627A
|
PIC16F628
|
PIC16LF628A
|
|
PIC16F628A
|
PIC16F630
|
PIC16F631 |
PIC16F636
|
PIC16F639
|
PIC16F648A
|
|
PIC16F677 |
PIC16F676 |
PIC16F683
|
PIC16F684
|
PIC16F685
|
PIC16F687
|
|
PIC16F688
|
PIC16F689
|
PIC16F690
|
PIC16F716
|
PIC16F72 |
PIC16F73 |
|
PIC16F74 |
PIC16F76 |
PIC16F77 |
PIC16F737
|
PIC16F747
|
PIC16F767
|
|
PIC16F777
|
PIC16F785
|
PIC16F83
|
PIC16F84
|
PIC16F84A
|
PIC16F87
|
|
PIC16F88 |
PIC16F818
|
PIC16F819
|
PIC16F870
|
PIC16F871
|
PIC16F872
|
|
PIC16F873
|
PIC16F873A
|
PIC16F874
|
PIC16F874A
|
PIC16F876
|
PIC16F876A
|
|
PIC16F877
|
PIC16F877A
|
PIC16F913
|
PIC16F914
|
PIC16F916
|
PIC16F917
|
|
PIC16F882 |
PIC16F883 |
PIC16F884 |
PIC16F886 |
PIC16F887 |
|
|
18
series: |
|
PIC18F242
|
PIC18F248
|
PIC18F252
|
PIC18F258
|
PIC18F442
|
PIC18F448
|
|
PIC18F452
|
PIC18F458
|
PIC18F1220
|
PIC18F1320
|
PIC18F2220
|
PIC18F2221
|
|
PIC18F2320
|
PIC18F2321
|
PIC18F2331
|
PIC18F2410
|
PIC18F2420
|
PIC18F2431
|
|
PIC18F2450
|
PIC18F2455
|
PIC18F2480
|
PIC18F2510
|
PIC18F2515
|
PIC18F2520
|
|
PIC18F2525
|
PIC18F2550
|
PIC18F2580
|
PIC18F2585
|
PIC18F2610
|
PIC18F2620
|
|
PIC18F2680
|
PIC18F4220
|
PIC18F4221
|
PIC18F4320
|
PIC18F4321
|
PIC18F4331
|
|
PIC18F4410
|
PIC18F4420
|
PIC18F4431
|
PIC18F4450
|
PIC18F4455
|
PIC18F4480
|
|
PIC18F4510
|
PIC18F4515
|
PIC18F4520
|
PIC18F4525
|
PIC18F4550
|
PIC18F4580
|
|
PIC18F4585
|
PIC18F4610
|
PIC18F4620
|
PIC18F4680
|
PIC18F6520
|
PIC18F6525
|
|
PIC18F6585
|
PIC18F6620
|
PIC18F6621
|
PIC18F6680
|
PIC18F6720
|
PIC18F8520
|
|
PIC18F8525
|
PIC18F8585
|
PIC18F8620
|
PIC18F8621
|
PIC18F8680
|
PIC18F8720
|
|
ATMEL
serial EEPROM series: |
|
24C01 |
24C01A |
24C01B |
24C02 |
24C02A |
24C02B |
|
24C02C |
24C04 |
24C04A |
24C04B |
24C08 |
24C08B |
|
24C16 |
24C16B |
24C32 |
24C32A |
24C64 |
24C128 |
|
24C256 |
24C512 |
93C46 |
93C56 |
93C66 |
93C76 |
|
93C86 |
|
|
|
|
|
|
MICROCHIP serial EEPROM series: |
|
24C01A |
24LC01 |
24C02A |
24LC02 |
24C04A |
24LC04 |
|
24C16 |
24LC16 |
24C32 |
24C64 |
24C128 |
24C256 |
|
24C512 |
93LC46A/B
|
93LC56A/B
|
93LC66A/B
|
93LC76A/B
|
93LC86A/B
|
|
NS
serial EEPROM series: |
|
NM24C01 |
NM24C02 |
NM24C03 |
NM24C04 |
NM24C08 |
NM24C16 |
|
NM24C32 |
NM24C64 |
NM24C128 |
|
|
|
|
EXEL
serial EEPROM series: |
|
24C01 |
24C02 |
24C04 |
24C08 |
24C16 |
24C64 24C128 |
|
THOMSON serial EEPROM series: |
|
ST24C01 |
ST24C02 |
ST24C04 |
ST24C08 |
ST24C16 |
ST24C64 ST24C128 |
|
XICON
serial EEPROM series:
|
|
X24C01 |
X24C01A |
X24C02 |
X24C02A |
X24C04 |
X24C04A |
|
X24C08 X24C08A |
X24C16 |
X93C46A/8bit/16bit |
X93C56A/8bit/16bit |
X93C66A/8bit/16bit |
X93C86A/8bit/16bit |
|
ST
serial EEPROM series: |
|
24C01/A |
24C02/A |
24C04 |
24C08 |
24C16 |
24C32 |
|
24C64 |
24C128 |
93C46A/8bit/16bit |
93C56A/8bit/16bit |
93C66A/8bit/16bit |
|
|
Holtek serial EEPROM series: |
|
HT24C01 |
HT24C02/A |
HT24C04 |
HT24C08 |
HT24C16 |
HT24C32 |
|
HT24C64 |
HT24C128 |
93C46A/8bit/16bit |
93C56A/8bit/16bit |
93C66A/8bit/16bit |
|
| |
|
Tip:
16F57,16F59 Only use icsp mode |
|
Programmer device timer
|
|
Device |
timer |
Device |
timer |
|
PIC16F72 |
3S |
PIC16F628A |
8S |
|
PIC12F629 |
4S
|
PIC16F716
|
7S |
|
PIC16F630 |
5S |
PIC16F84A |
8S |
|
PIC16F54 |
2S |
PIC18F877A |
12S
|
|
|
|
|
Package includes the following item:
1:
QL-2006 programmer
2. USB Cable
3: ICSP Cable
4: CD ROM(QL-PROG soft; USB Driver; MPLAB IDE; English versions
of user manuals..)
(USB
Communication not need external power supply)
If your computer does not have a USB port, you may using your
own RS232 cable (serial) connection, using RS232 communication
required 7-9 V DC power supply (regardless of polarity)
programmer
soft downlode:
http://www.cxqmcu.com/wzcapi/ql2005/ql-progv2.2en.rar
Price: US $49.99
Worldwide
shipping by Registered Air Mail----- US $10.99 (about
7-20days)
Worldwide shipping by DHL/UPS/TNT/FedEx/EMS... Express---- US $25.00 (about 3-7days)
Purchasing Instructions:
At the time of purchase, please indicate the following:
Contact telephone number for shipping purposes
|
FAQ |
|
Hi, if we buy now, when you shipped to me ? |
- When we received you payment, we will sent the items to you
within 1-2 work days !
|
|
you sent the items to me ,you have the tracking number for me ? |
- If Shipping by
Registered Air Mail,
We will send you by Registered Air mail, This is
have tracking number, and it can
takes
7-20 working days.
- If Shipping
by
DHL/UPS/TNT/FedEx Express,
We will send you by DHL/UPS/FedEX/TNT/EMS..Express,
This is have provide Tracking number! and it can takes
3-7 working days !
|
|
If the item in the swap in the transport stolen, and you will be
re-distributed to us? |
- If you buy the parts, within the prescribed time did not
receive goods, we will re-sent to you.
- For example, if shipping by Air
Mail or Registered Air Mail, if you buy the parts on jaunary 1,
you will received the parts on Jaunary 30 before, becuase it
takes 7-20 working days, if you not received the parts on
Jaunary 30 before, please tell me we, we will re-sent to you!
- For example, if shipping by
DHL/UPS/FedEX/TNT/EMS..Express, if you buy the parts on jaunary
1, you will received the parts on Jaunary 15 before, becuase it
takes 3-7 working days, if you not received the parts on Jaunary
15 before, please tell me we, we will re-sent to you!
|
- We WON'T resend any bounce back order due to incorrect
shipping address
|
|
|
|
payment method |
- Accept paypal
Credit card through Paypal
I will ship to the shown address on you PAYPAL Payment notice.
Please confirm your shipping address in the PayPal Account
or Please tell me your shipping address
by Email,
Please tell me you phone number
Buyers need to absorb ALL re-shipments fee of returned packages
|
|
Return Policy |
- 100% money back guarantee or exchange the same class of the
products.
Full refund will be issued upon receipt of the Deffective Item.
Please be advised that shipping and handling cost are not
refundable.
Buyers must be returned the defective products within 7 days
from the date when product received.
Refund or Replacement will be sent after we received your
returning item.
In all cases, buyers pay shipping at their own cost to return
products for exchange or refund.
|
|
Shipping Schedule |
- Normally, Your order will be shipped within 1-2 our business
days after the payment is cleared.
The shipping time may vary, depends on receiver's location.
|
|
Item Declare |
- Your item will mark as Gift or Sample and a low's value.
We are NOT responsible for any import tax, customs fees or
customs delay.
Buyer cannot request to cancel the auction or request for refund
under this situation. Please check with your local tax
authorities BEFORE bidding.
However, most of our items can reach to buyers without any
taxes.
|
|
Payment methods 1: Direct remittance to PAYPAL
|
|
| Method 2:You can go directly to our EBAY purchased
online stores, and its Web site is:
http://stores.ebay.com/QLS-Microchip-pic-mcu-mpu-tools |
| |
|
Method 3:
BANK OF CHINA International Business: |
Remittance form:Remittance to
our BANK OF CHINA account use U.S.dollars through local banks.
Remittances cost:General remittances will be fixed at 25
dollars deducted, the total amount of remittances:The total
amount of products + Shipping+ USD $25.00.
The message witch provide to the local bank's:(To avoid
making mistakes,You can put the following message to the bank
staff,and ask he fill the forms for you )
A/C NO: 4766938-0188-129144-0
IN A/C WITH: TANG YAN
BENE‘S BANK: BANK OF CHINA SHENZHEN BEI
FANG BUILDING SUB-BRANCH
SWIFT CODE: BKCHCNBJ45A ADD:
1/F,BEI FANG BUILDING,SHEN NAN
ZHONG ROAD,SHENZHEN,CHINA
POST CODE:
518033
E-MAIL:
cxqmcu@cxqmcu.com
clark_chen@aliyun.com
315392961@qq.com
|
|
| |
|
|
